JVC GR-DV2000 Instructions Manual page 76

76
EN
SYMPTOM
21. The Video Echo mode
does not work.
22. Even when Slow Shutter is
not selected, the image
looks like it is activated.
23. There is no strobe when
the Classic Film or Strobe
mode is activated.
24. White Balance cannot be
activated.
25. When shooting a subject
illuminated by bright light,
vertical lines appear.
26. When the screen is under
direct sunlight during
shooting, the screen
becomes red or black for
an instant.
27. During recording, the date/
time does not appear.
28. Images stored in the
memory card cannot be
deleted.
29. The indicators and
messages do not appear.
TROUBLESHOOTING
POSSIBLE CAUSES
21. •The Picture Wipe or
Dissolve functions are in use.
•"WIDE MODE" is set to
"SQUEEZE" or "PS-WIDE" in
the Menu Screen.
•A Fade-In or Fade-Out is in
progress.
22. •When shooting in the dark,
the unit becomes highly
sensitive to light and the
image takes on an effect
similar to Slow Shutter.
23. •The Picture Wipe or Dissolve
function is in use.
24. •The Sepia or Monotone
mode is activated.
25. •This is a result of exceedingly
high contrast, and is not a
malfunction.
26. •This is not a malfunction.
27. •"DATE/TIME" is set to "OFF"
in the Menu Screen.
•Interface Shooting is
performed.
28. •Images stored in the memory
card are protected.
29. •"TIME CODE" is set to
"OFF" in the Menu Screen.
CORRECTIVE ACTION
21. •Set "WIDE MODE" to
"CINEMA" or "OFF" mode
( pg. 28).
•Do not try to use the Video
Echo mode during a Fade-In
or Fade-Out (
22. •If you want the lighting to
look more natural, set GAIN
UP to "AGC" or "OFF" in
the Menu Screen
( pg. 27).
23. •Do not try to use the Classic
Film or Strobe mode during
a scene transition
( pg. 32, 34).
24. •Turn off Sepia or Monotone
before setting White
Balance ( pg. 35, 37).
25.
————
26.
————
27. •Set "DATE/TIME" to "ON"
in the Menu Screen
( pg. 29).
•During Interface Shooting,
the date/time does not
appear ( pg. 17).
28. •Remove protection from the
images stored in the
memory card and delete
them ( pg. 44, 45).
29. •Set "TIME CODE" to "ON"
in the Menu Screen
( pg. 29, 39).
(cont.)
pg. 32, 34).