JVC GR-DV2000 Instructions Manual page 48

48
EN
Power Switch
Lock Button
Display
E X I T D E L E T E
0 1 3 F 0 1 4 F
0 1 6 F 0 1 7 F
FRAME D L . E
SE ECT L – CANCEL
EXECUTE
CAUTION:
Do not remove the memory card or
perform any other operation (such as
turning off the camcorder) during deletion.
Also, be sure to use the provided AC Power
Adapter/Charger, as the memory card may
be corrupted if the battery becomes
exhausted during deletion. If the memory
card becomes corrupted, initialise it.
( pg. 47)
PLAYBACK
MEMORY
PLAY Button
MENU Wheel
DELETE Index
Screen
0 1 5 F
0 1 8 F
Deletion
Confirmation
Screen
Advanced Features For D.S.C. (cont.)
Print Frame Deletion
A print frame created on a PC can be transferred to a
memory card using the provided software. Print frames
that have been transferred to a memory card can be
deleted when they are no longer needed.
There are 2 ways of deleting previously created print
frames: by browsing through print frames individually or
by deleting them all at once.
TO SELECT A PRINT FRAME BY BROWSING
PRINT FRAMES STORED IN MEMORY
1
Set the Power Switch to "
the Lock Button located on the switch. Open the LCD
monitor fully or pull out the viewfinder fully.
2
Press MEMORY PLAY.
3
Press the MENU wheel. The Menu Screen appears.
4
Press the MENU wheel again. The MEMORY Menu
appears.
5
Rotate the MENU wheel to select "FRAME DEL." and
press it. The Sub Menu appears.
6
Rotate the MENU wheel to select "SELECT" and press
it. The DELETE Index Screen appears.
7
Rotate the MENU wheel to move the green frame to
the desired print frame that you wish to delete and
press it. An " " appears above the selected print
frame.
Repeat this procedure for all print frames that you
wish to delete.
To deselect a print frame, press the MENU wheel
again. The " " disappears.
8
Rotate the MENU wheel upward to select "EXIT" and
press it. The Deletion Confirmation Screen appears.
9
Rotate the MENU wheel to select "EXECUTE" and
press it. The selected print frames are deleted and the
normal playback screen appears.
•To cancel deletion, rotate the MENU wheel to select
"CANCEL" and press it.
NOTES:
If print frames created on a PC have not been transferred
to a memory card, it is not possible to delete them using
these steps.
The print frames in the camcorder's memory cannot be
deleted.
", while pressing down