Menu Items On The [Echo] Menu; Remote Display - Furuno 1835 Operator's Manual

1. DESCRIPTION OF OPERATION
1.44.3

Menu items on the [Echo] menu

[Color Erase]: Erase the lower echo color whose level is set here. Set a large value
to display only the stronger echoes.
1.45

Remote Display

You can use this radar as a remote display when you set [Input Source] to [Slave] on
the [Installation] sub menu. When this setting is done, the menu and display change
as described below. To display the radar image on the remote display, transmit from
the main radar.
Note: The message "Please turn to STBY-mode when you change this setting." ap-
pears when you switch the mode in transmission.
Unavailable menu items
The menu items are not available with the remote display as shown in the table.
Menu
[Echo]
[Custom 1, 2, 3]
[Alarm]
[Tuning]
[System] - [Sector Blanks]
[System] - [Installation]
Display appearance
The display changes as shown in the following illustration.
Pulselength
is not displayed.
0.125
H U P
Transmitting or standby display indications for remote display
1-56
www.busse-yachtshop.de | info@busse-yachtshop.de
Color Erase setting window
[Pulse Length], [2nd Echo Rejector]
[Pulse Length]
[Watchman]
All menu items are inoperative.
All menu items are inoperative.
[Antenna Rotation], [MBS Adjust],
[Auto Install Setup], [Total TX Time]
Shown when display
unit functions as
remote display.
0.5
SLAVE H D G
NM
OFFCENT(M)
C S 1
Unavailable menu item(s)
Tuning indicator
is not displayed.
TRAIL(T)
3 5 9 . 9°
06MIN
WTC is not displayed.
ALM1_ACK
ALM2_OUT