Characteristics Curve - Furuno 1835 Operator's Manual

1.37

Characteristics Curve

You can change the characteristics curve to reduce unwanted weak echoes (sea re-
flections, etc.). Select [1], [2] or [3] depending on conditions when unwanted weak
echoes hide wanted targets.
1. Press the MENU key to open the menu.
2. Use the Cursorpad ( or ) to select [Echo] and press the ENTER key.
3. Use the Cursorpad ( or ) to select [Display-Curve] and press the ENTER key.
4. Use the Cursorpad ( or ) to select [1], [2] or [3] then press the ENTER key.
[1]: Reduce weak echoes.
[2]: Normal use
[3]: Display weaker echoes in stronger color compared to [1].
5. Press the MENU key to close the menu.
Display-Curve options
3
Strong
Echo color
strength
Input level
Display curve
1. DESCRIPTION OF OPERATION
2
1
Strong
1-45