Wiring Diagram - Whirlpool AMD 310 Instructions For Use Manual

CAUTION:
1. Use an individual power circuit specifically for the air conditioner. As for the wiring method, refer to the
circuit diagram on the inside of the access door .
2. Check that the cable thickness conforms to the power source specification.
3. Check the wires and make sure that they are all tightly fastened after cable connection.
4. Be sure to install an earth leakage circuit breaker in a wet or moist area.
Cable Specifications
Power cord
Capacity
(Btu/h)
Normal cross -
Type
sectional area
7K, 9K, 12K H05VV-F
H05VV-F
18K
RVV

WIRING DIAGRAM

Make sure that the colour of wires of the outdoor unit and the terminal number are the same as those of
the indoor unit.
• Power supply from Indoor unit, including 7K,9K,12K,18K Model
HEAT PUMP
Indoor unit
Terminal
Brown
Blue
power connecting cord 1
Brown
Blue
power connecting cord
Yellow/Green
Power connecting cord
Type
1.0 mm² X3 H05RN-F
1.5 mm² X3 H07RN-F
Outdoor unit
Terminal
Brown
Blue
Brown
Blue
Yellow/Green
Power connecting cord 1
Normal cross -
Type
sectional area
1.0 mm² X3 H05RN-F
1.5 mm² X3 H05RN-F
YE/GN
BN
BU
Power supply
23
Main
power
supply
Normal cross -
(Note)
sectional area
0.75 mm² X2
To indoor
(Heat-pump)
0.75 mm² X2
To indoor
(Heat-pump)
Evaporator
Indoor unit control board
AC L-IN
AC N-IN