Whirlpool AMD 310 Instructions For Use Manual page 13

SLEEP mode
SLEEP mode can be set in COOLING or
HEATING operation mode.
This function gives you a more comfortable
environment for sleep.
In SLEEP mode,
• The appliance will stop operation automatically
after operating for 8 hours.
• Fan speed is automatically set at low speed.
• Set temperature will rise by max 1°C if the
appliance operates in cooling mode for 2 hours.
• Set temperature will decrease by 3°C at most if
the appliance operates in heating mode for 3
hours.
*Note: In cooling mode, if room temperature is
26°C or above, set temperature will not change.
Note: Heating is NOT available for cooling only air
conditioner.
JET mode
• JET mode is used to start or stop fast cooling.
Fast cooling operates at high fan speed, changing
the set temperature automatically to 18°C.
• JET mode can be set when the appliance is in
operation.
• In JET mode, you can set airflow direction or
timer. If you want to quit from JET mode, press
any - JET, MODE, FAN, ON/OFF or
TEMPERATURE SETTING button, the display
will return to the original mode.
Note:
• SLEEP and 6th Sense buttons are not available
in JET mode.
• JET button is ineffective in HEATING mode.
• The appliance will continue working in JET
mode with set temperature of 18°C if you don't
quit from it by pressing any of the buttons
mentioned above.
13