Table of Contents
Advertisement
*
The UPS audible alarm should sound intermittently when the UPS is
operating from the battery source.
*
Connect a normal load to the UPS.
Disconnect the input power. Again the audible alarm should sound
intermittently. When the UPS is under the back-up mode, a battery
capacity sensitive beeping indicates the battery power status. It will
beep continuously when low battery status is reached. The UPS will
automatically shut down in one or two minutes to protect the battery
from over discharging under such condition.
CAUTION:
The UPS has been provided with a high line transfer circuit
which will cut off the input to the rectifier if it exceeds 275
Volts AC. After initial start-up keep power continuously to
the unit for at least 24 hours to ensure batteries fully
charged. To ensure charging the batteries, the main circuit
breaker and the battery circuit breaker should be left in the
"ON" position. However, the front panel "ON/OFF" switch
can be used as daily run/standby switch. Note that the
output will still be connected to the bypass supply and
inverter will be off.
STORAGE INSTRUCTIONS
1.
Leave equipment connected to input power and turned on for 24 hours
prior to storage.
2.
Turn off the main circuit breaker.
3.
Store in a cool, dry environment (Below 80° F / 27°C)
4.
Remove from storage and repeat step 1 for every 90 days.
TABLE 2- UPS CURRENT RATINGS
UPS RATING
INPUT
VOLTAGE
INPUT
CURRENT
CABLE SIZE
OUTPUT
VOLTAGE
OUTPUT
CURRENT
OUTPUT CABLE
SIZE
BATTERY
CURRENT
BATTERY
CABLE SIZE
:
3 KVA
220V
240V
19 A
17 A
4 mm sq
4 mm sq.
220 A
240 V
13.6A
1.25A
2.5 mm sq.
2.5mm sq. 4 mm sq
14.5A
14.5A
4 mm sq.
4 mm sq.
Turn on the power switch.
5KVA
220 V
240 V
32 A
29.5 A
6 mm sq
6 mm sq.
220 V
240 V
22.75A
20.8A
4 mm sq
23.5A
23.5A
4 mm sq.
4 mm sq.
6 KVA
220 V
240 V
38.4 A
35.2 A
6 mm sq.
6 mm sq.
220 V
240V
27.3A
25A
4 mm sq
4 mm sq
28A
28A
4 mm sq.
4 mm.sq.
17
Hide quick links:
Advertisement
Table of Contents
