Liebert PowerSure Personal User Manual
Liebert PowerSure Personal User Manual

Liebert PowerSure Personal User Manual

300-500 va; 230v
Hide thumbs Also See for PowerSure Personal:

Advertisement

Quick Links

P
S
P
OWER
URE™
ERSONAL
300-500 VA
230V
U
M
SER
ANUAL

Advertisement

Table of Contents
loading

Summary of Contents for Liebert PowerSure Personal

  • Page 1 OWER URE™ ERSONAL 300-500 VA 230V ANUAL...
  • Page 2: Important Safety Instructions

    The PowerSure Personal 230VAC models are not supplied with an input power lead for connection to the mains supply. Use the input mains power lead from your data processing equipment to connect the UPS to the mains supply.
  • Page 3 Your UPS provides conditioned power to connected equipment. Maximum load must not exceed that shown on UPS rating label. If uncertain, consult your distributor or Liebert. Placing magnetic storage media on top of the UPS may result in data corruption.
  • Page 4: Introduction & System Description

    INTRODUCTION & SYSTEM DESCRIPTION Congratulations on your choice of the Liebert PowerSure Personal Uninterruptible Power System (UPS). It provides conditioned power to microcomputers and other sensitive electronic equipment. MAJOR COMPONENTS Pow erSure P er sonal D B-9 Interface for SiteN et M ultiLink C able...
  • Page 5: General Installation

    GENERAL INSTALLATION Pow erSure Per sonal Pow erSure Per sonal Lie bert Liebert Rem ove from Box Check for Dam age Pow erSure Per sonal 110 m m 0° - 40° C Liebert Rem ove Plug from Unit and replace in UPS...
  • Page 6: Normal Mode Operation

    NORMAL MODE OPERATION This UPS is simple to operate and requires minimum operator attention. Bring the UPS into operation as follows: Check that all the power cables to and from the UPS are secure and fitted with the correct cables. Switch the AC mains supply on.
  • Page 7: Battery Mode

    LED & ALARM INDICATIONS Startup Mode Green Alarm Action Press ON Flash Flash Beep UPS Start button for 1-2 sec. 1-2 sec. 1-2 sec. 2 seconds AC Mode Mode Green Alarm Indicates AC Normal UPS is on-line Flash 10 sec. Beep 10 sec.
  • Page 8: Troubleshooting

    UPS - the total wattage of your equipment may exceed the capacity of the UPS. For further help, call your Liebert representative Low Battery Turn OFF equipment and recharge UPS battery for at least 7 to 10 hours. If problem persists,...
  • Page 9: Pin Assignment

    You can use SiteNet® MultiLink™ to allow your UPS to communicate to your computer via your DB-9 communications port. Download MultiLink from our web site at www.liebert.com. The PowerSure™ Personal UPS contains a standard DB-9 receptacle located on the rear of the UPS unit.
  • Page 10: Maintenance

    MAINTENANCE The PowerSure Personal UPS requires very little maintenance. The batteries are valve regulated, nonspillable, lead acid, and require that they be kept charged to obtain their designed life. When connected to the mains supply, the battery is continuously charged.
  • Page 11 230V SPECIFICATIONS Model Number PSP300-230 PSP500-230 Model Rating VA / W 300 / 180 500 / 300 DIMENSIONS: mm (in) Unit 178 x 76 x 238 178 x 76 x 238 H x W x D (7.0 x 3.0 x 9.4) (7.0 x 3.0 x 9.4) Shipping 270 x 110 x 312...
  • Page 12: Limited Warranty

    The responsibility for risk assessment and management in applications where the malfunction or failure of the UPS could be reasonably expected to give rise to a risk of human life shall be the sole responsibility of the purchaser. Liebert accepts no liability for consequential harm in such applications.
  • Page 13: Technical Support

    Worldwide FAX tech support +614-841-5471 The Company Behind The Products With more than 500,000 installations around While every precaution has been taken the globe, Liebert is the world leader in to ensure accuracy and completeness of computer protection systems. Since its this...

Table of Contents