Id Settings; Setting The Projector Id; Checking The Projector Id - Epson EB-Z10005U User Manual

Installing the Projector

ID Settings

When an ID is set for the projector and the remote control, you can use
the remote control to operate only the projector with a matching ID. This
is useful when you use multiple projectors together.
a
• Operation using the remote control is possible only for projectors
that are within the operating range of the remote control.
s "Remote control operating range"
• When Remote Control Type is set to Simple from Operation -
Advanced in the Configuration menu, you cannot set the remote
control ID.
s "Extended Menu"
• IDs are ignored when the projector ID is set to Off or the remote
control ID is set to 0.

Setting the projector ID

a
Press the [Menu] button while projecting.
b
Select Multi-Projection from Extended.
c
Select Projector ID, and then press the [
p.24
p.122
] button.
d
Select the ID you want to set, and then press the [
e
Press the [Menu] button to close the Configuration menu.

Checking the projector ID

During projection, press the [Help] button while holding down the [ID]
button.
Remote control
When you press the buttons, the current projector ID is displayed on the
projection screen. It closes after about three seconds.
39
] button.