Part Names And Functions; Front/Top - Epson EB-Z10005U User Manual

Part Names and Functions

The illustrations in this guide are for projectors with the standard zoom
lens ELPLS04.

Front/Top

Name
A
Handles Use these handles when carrying the projector. Also, you
can pass an anti-theft wire lock through the handle to
secure the projector.
s "Installing the wire lock"
B
The security slot is compatible with the Microsaver
Security slot ( )
Security System manufactured by Kensington.
s "Installing the wire lock"
Function
p.112
p.112
Name
C
Air intake vent Takes in air to cool the projector internally. If dust collects
(Air filter) here it can cause the internal temperature to rise, and this
can lead to problems with operation and shorten the
optical engine's service life. Be sure to clean the air filter
regularly.
s "Cleaning the Air Filter"
s "Replacing the Air Filter"
D
When setting up on a desk, turn to extend and retract to
Front feet
adjust the horizontal tilt.
The front feet can be removed when the projector is
installed on a ceiling.
s "Adjusting the tilt of the projected image (for normal
installment)"
E
Receives signals from the remote control.
Remote receiver
s "Remote control operating range"
F
Remove this cover to connect cables to the ports inside
Interface cover
when connecting the projector to video equipment.
s "Interface"
s "Attaching and Removing the Interface Cover"
p.28
G
Images are projected through here.
Projection lens
H
Operate this when removing the interface cover.
Interface cover
removal switch
s "Attaching and Removing the Interface Cover"
p.28
I
Operate this when removing the interface cover.
Interface cover
s "Attaching and Removing the Interface Cover"
removal button
p.28
J
Cable wiring slot (top) Remove the cover, and pass the cable up through here.
s "Attaching and Removing the Interface Cover"
p.28
K
Remove when attaching or removing the lens.
Lens replacement
s "Attaching the Projector Lens Unit"
cover
Function
p.172
p.179
p.36
p.24
p.16
p.26
14