Projecting Images; Automatically Detect Input Signals And Change The Projected Image (Search) - Epson EB-Z10005U User Manual

Projecting Images

Automatically Detect Input Signals and Change
the Projected Image (Search)
Press the [Search] button on the remote control to project images from the
port currently receiving an image.
* For EB-Z10005U/EB-Z10000U/EB-Z9875U/EB-Z9870U only
When multiple devices are connected, press the [Search] button on the
remote control until the target image is projected.
When video equipment is connected, make sure that the equipment is ready
to play, and then start this operation.
Remote control
a
• You can make settings so that images are projected from the same
input port the next time the projector is turned on.
s Extended - Operation - Startup Source Search
• The following screen is displayed while no image signals are input.
58
p.122