Hiding The Image Temporarily (Shutter) - Epson EB-Z10005U User Manual

Projection Functions

Hiding the Image Temporarily (Shutter)

You can switch off the image on the screen when you want to focus the
audience's attention on what you are saying, or when you do not want to
display operations such as changing files.
Each time you press the [Shutter] button, the shutter function turns on or
off.
Remote control
a
• When the shutter function is activated and no operations are
performed for about 120 minutes, the projector turns off
automatically. If you do not want to turn off the power, set Shutter
Timer to Off.
s Extended - Operation - Shutter Timer
• If you press the [t] button while the shutter is closed, the shutter is
automatically released and a message requesting confirmation to turn
off the power is displayed on the screen.
• The Lamp1 and Lamp2 indicators flash while the shutter function is
activated.
• When an event that is set in the schedule function is executed, the
shutter function is released.
• When Shutter Release is set to Shutter in the Extended menu, the
following operations can be performed while the shutter function is
still being activated.
- Change the source with the change input buttons on the remote
control.
- Control the projector from a computer using communication
commands.
s Extended - Operation - Advanced - Shutter Release
The shutter function is only released by pressing the [Shutter]
button, or by sending a command to release the shutter function.
• When projecting moving images, the images continue to be played
back while the shutter function is activated. It is not possible to
resume projection from the point where the shutter function was
activated.
• The lamp is still lit while the shutter function is activated, so the
lamp hours continue to accumulate.
94
p.122
p.122