Screen Settings; S "Using The Configuration Menu - Epson EB-Z10005U User Manual

Installing the Projector
a
• You can specify the date and time and automatically switch the
lamps.
s "Scheduling Function"
• Approximately 120 seconds after changing the Lamp Select settings,
you cannot change Lamp Select or turn off the projector.
• Note that switching the settings for Lamp Select in a short time may
deteriorate the lamps or cause a malfunction.
• When performing Multi-Projection, set it to Dual.
• When a problem or warning occurs in the projector, you may not be
able to set Lamp Select.
• When the brightness of the lamps is reduced due to Temp Interlock,
you cannot set Lamp Select.
s Settings - Power Consumption
p.100
p.121

Screen Settings

Set the Screen Type according to the aspect ratio of the screen being used.
The area where the image is displayed matches the shape of the screen.
a
The settings for the Screen Type at the time of purchase are as
follows:
• WUXGA/WXGA projector: 16:10
• XGA projector: 4:3
a
Press the [Menu] button while projecting.
"Using the Configuration Menu"
s
b
Select Display from Extended.
c
Select Screen Type from Screen.
d
Select the screen's aspect ratio from 4:3, 16:9, and 16:10.
The shape of the background test pattern changes depending on the
setting.
32
p.114