Adjusting The Horizontal Tilt (For Normal Installment); Id Settings; Set The Projector Id - Epson V11H735140 User Manual

Installing the Projector
Adjusting the Horizontal Tilt (for Normal
Installment)
Extend and retract the front and rear feet to adjust the projector's
horizontal tilt.
A
Extend the front and rear feet.
B
Retract the front and rear feet.

ID Settings

When an ID is set for the projector and the remote control, you can use
the remote control to operate only the projector with a matching ID. This
is very useful when managing multiple projectors. You can set up to 30
IDs.
a
• Operation using the remote control is possible only for projectors
that are within the operating range of the remote control.
s "Remote control operating range"
• When Remote Control Type is set to Simple in the configuration
menu, you cannot set the remote control ID.
s Extended - Operation - Advanced - Remote Control Type
p.133
• IDs are ignored when the projector ID is set to Off or the remote
control ID is set to 0.
• If you use Epson Web Control, you can operate a specific projector
from a mobile device.
s "Changing Settings Using a Web Browser (Epson Web Control)"
p.194

Set the projector ID

a
Press the [Menu] button while projecting.
"Using the Configuration Menu"
s
b
Select Multi-Projection from Extended.
c
Select Projector ID, and then press the [
d
Press the [ ][ ] buttons to select an ID number.
40
p.24
p.124
] button.