Replacing The Remote Control Batteries - Epson EB-Z10005U User Manual

Part Names and Functions

Replacing the remote control batteries

If delays in the responsiveness of the remote control occur or if it does not
operate after it has been used for some time, it could mean that the
batteries are running low. When this happens, replace them with new
batteries. Have two AA size alkaline or manganese batteries ready. You
cannot use other batteries except for the AA size alkaline or manganese.
Attention
Make sure you read the following manual before handling the batteries.
Safety Instructions
s
a
Remove the battery cover.
Release the battery compartment cover catch, and then lift up the
cover.
b
Replace the old batteries with new batteries.
Caution
Check the positions of the (+) and (-) marks inside the battery holder to
ensure the batteries are inserted the correct way.
If the batteries are not used correctly, they could explode or leak causing
a fire, injury, or damage to the product.
c
Reattach the battery cover.
Press the battery compartment cover until it clicks into place.
23