Remote Control; S "Adjusting The Position Of The Projected Image; Shift); Returns To The Center - Epson EB-Z10005U User Manual

Part Names and Functions

Remote Control

Name
A
Press to turn the projector on.
[ ] button
B
[t] button Press to turn the projector off.
C
Change input buttons Press to change to signals from each input port.
s "Switching to the Target Image"
The [SDI] button is only available for EB-Z10005U/EB-
Z10000U/EB-Z9875U/EB-Z9870U.
D
Each time the button is pressed, the aspect mode changes.
[Aspect] button
s "Changing the Aspect Ratio of the Projected Image"
p.72
E
If pressed while projecting analog RGB signals from the
[Auto] button
Computer input port or the BNC input port, you can
automatically optimize Tracking, Sync., and Position.
F
Press to pause or unpause the images.
[Freeze] button
s "Freezing the Image (Freeze)"
G
Displays a test pattern.
[Test Pattern] button
s "Displaying a Test Pattern"
H
Press to adjust the lens shift.
[Lens Shift] button
s "Adjusting the Position of the Projected Image (Lens

shift)"

If pressed for more than five seconds, the lens position

returns to the center.

I
Press to adjust the zoom.
[Zoom] button

s "Adjusting the Zoom"

J
Press to display and close the Configuration menu.
[Menu] button
s "Using the Configuration Menu"
Function
p.59
p.95
p.34
p.35
p.37
p.114
20