Webasto Thermo Top C Operating And Maintenance Instructions page 4

Switch heater or ventilation on
Hold handheld transmitter with antenna pointing straight
upwards and press the ON button for 1 or 2 seconds.
NOTE:
!
In heating mode, the vehicle heating must be set to
"warm" before leaving the vehicle.
In both heating and ventilation modes, the vehicle fan
must be set to the 1st speed in the case of a 3-speed
fan and to the 2nd speed in the case of a 4-speed fan.
Fans with infinite adjustment must be set to at least
1/3 of the fan performance.
Switch heater or ventilation off
Via handheld transmitter:
Hold handheld transmitter with antenna pointing straight
upwards and press the OFF button for 1 or 2 seconds.
Via timer:
Press the direct heating button twice.
Check and set duty period
The duty period of the heater or vehicle fan can be set on the transmitter in
10-minute increments. The duty period is set to 30 minutes as the manufacturer's default
setting.
! NOTE:
The duty period must be set to 20 or 30 minutes in heating mode for the
Thermo Top and Thermo Top T heaters.
The heating time should correspond to the driving time for Thermo Top C and
Thermo Top E heaters.
For instance, if the vehicle is used for driving to and from work.
We recommend that the duty period be set to 30 minutes for a journey lasting
approx. 30 minutes (one way).
Check duty period
Simultaneously press the ON and OFF buttons three times
briefly in succession within one second.
NOTE:
!
The first flashing pulse output simultaneously with
the third actuation of the two buttons must also be
counted.
The LED flashes in accordance with the set duty period.
Number of flashes 1 2
Duty period 10 min. 20 min.
3 x
3 4 5 6
30 min. 40 min. 50 min. 60 min.
3-program timer
Heating Display illumination
indication
1
2
Symbol
3
for set /
view time
SET
Direct heating Return Program selection Forward
General
The time at which heating starts can be set precisely between
"1 minute" and "24 hours". Three switch-on times can be
programmed, but only one can be activated at any one time.
Maximum duty period: 60 minutes.
Switching on Manually: by pressing the direct heating button
Automatically: by preprogramming the time at which heating starts
The program number appears in the display and the
display lights up.
Switching off Manually: by pressing the direct heating button
Automatically: by limitation of the duty period.
The display lighting goes out.
Set time
Press the time button
View time
Press the time button
Program start
Press button.
SET
of heating Within 10 seconds, press either forward
at which heating is to start appears on the display.
If a different program number is required, press the
10 seconds in each case.
Delete
Briefly press the button.
SET
program
Select
Press the button within 10 seconds in each case until the program
SET
programmed
number with the required time is displayed.
time
! Note
changeover
from summer
to winter time
Program
(and vice versa)
number
indication
Time
button
and then forward or back .
.
or back until the time
button within
SET