Motion Detection - D-Link DCS-942L User Manual

Section 3 - Configuration
Motion detection enables the camera to monitor the video feed for movement.
Enable Video
Select this box to enable the motion detection feature of your camera.
Motion:
Enable PIR: When this option is selected, the camera will use PIR (passive infrared) to detect
motion.
Sensitivity: Specifies the measurable difference between two sequential images that would
indicate motion. Please enter a value between 0 and 100.
Drawing Mode: Select Draw Motion Area to select the area of the picture to monitor for
movement to trigger recording or a snapshot. Use your mouse to click and
drag on the area that you would like to monitor for motion. Select Erase Motion
Area to clear a selected region and stop the camera from monitoring that area
of the picture.
Clear: Clears all motion detection areas from the picture.
Refresh Image:
Updates the image with a new one at the time the button is pressed.
Click Save Settings to save your changes.
D-Link DCS-942L User Manual

Motion Detection

45