Image Setup - D-Link DCS-942L User Manual

Section 3 - Configuration
This section allows you to configure the image settings for your camera.
Brightness Allows you to adjust the brightness level.
Control:
Contrast:
Allows you to adjust the contrast level.
Mirror: Horizontally flip the video.
Light Source:
This setting adjusts the light sensitivity of the camera for optimum performance
for either indoor or outdoor settings.
White Balance:
Allows you to set the camera to automatically set the white balance of the image.
Saturation: Allows you to adjust the saturation level.
B/W:
Changes the images recorded on the camera to be in black and white.
Flip: Select this box to vertically flip the video. If the camera is installed upside down,
Flip Image and Mirror should both be checked.
Frequency: Adjusts the video output. By default this is set to Auto, but you may override the
setting by manually selecting either 50Hz or 60Hz
Slow Shutter:
Allows you to select a slow shutter speed so as to capture more light in the
image. You can select from 1/15 second, 1/10 second, 1/7.5 second or 1/3.75
second.
Changes made to these settings will take effect immediately.
D-Link DCS-942L User Manual

Image Setup

36