Section 3 - Configuration
This section allows you to set up and configure the wireless settings on your camera.
Network Name:
This is the Service Set Identifier, an identifier for your wireless network.
Site Survey:
The drop down menu lists all the wireless networks that the camera was able to
detect. Click Rescan to scan for wireless networks again.
Wireless Mode:
Use Infrastructure if you are connecting your camera to a wireless router or
access point. Use Ad-Hoc if you are wirelessly connecting to your PC without a
wireless router or access point.
Security Mode:
For security, there are three choices; None, WEP, and WPA-PSK / WPA2-PSK.
Select the same encryption method that is being used by your wireless device/
router.
Cipher Type:
If you chose WPA-PSK or WPA2-PSK, choose whether to use TKIP or AES.
Key:
Enter the key(password) for your wireless network. Check the Show Hidden
Key box to reveal the password you have entered.
Click the Save Settings button to save your changes.
D-Link DCS-942L User Manual
Wireless Setup
34