D-Link DCS-942L User Manual page 31

Section 3 - Configuration
SD Recording Notifications is a feature to record video to the microSD card when a trigger
is activated. The microSD card must be formatted for use with the camera prior to running
the wizard. This can be done by using the format option found under SD Management. For
more details, please refer to "SD Management" on page 47.
Enable:
Check this box to enable the SD Recording function.
Only During: Check this box to setup a scheduled timeframe when recording should take
place. This is useful if you do not want to be recorded when it would otherwise
be inconvenient, such as during the night or on weekends.
SD Recording The SD Recording Wizard uses Profile 2 by default. More information about video
Type: profiles can be found in "Audio and Video" on page 37. You can set the file type
from the drop down menu. You can also specify how many seconds before and
after the event should be recorded, as well as how long the maximum duration
of the video clip should be in minutes.
Keep Free Space:
Set amount of space to keep free on the microSD card.
Cyclic
When this option is selected, it will cause the oldest snapshot/video files to be
deleted when the system requires storage space for new snapshot/video files.
Click Next to continue.
A summary of the options you selected is displayed for confirmation. If you are happy with
the selected configuration, click Apply. Otherwise, click Back to make the required changes.
D-Link DCS-942L User Manual 31