Ip Filter - D-Link DCS-942L User Manual

Section 3 - Configuration
The IP Filter is a feature used to allow or deny certain IP addresses when accessing the DCS-942L.
Access List Check this box to enable the IP Filter function.
Filtering:
Filter Type: Select whether to set the filter to allow or to deny connection from the IP
addresses listed.
IPv4 Filter List:
The current list of IPv4 addresses that are being filtered. Select a line and the
click the delete button to remove that entry.
IPv6 Filter List:
The current list of IPv6 addresses that are being filtered. Select a line and the
click the delete button to remove that entry.
Add New Filter. From the drop down menu, select whether to add a single IP, an entire subnet, or
a range of IP addresses. Enter an IP address, subnet, or IP range, then click Add
to create a new filter.
Administrator IP You can allow a single IP address to always have access to this camera, regardless
Address.
of the IP filter rules being used, by enabling this option and entering the IP
address.
Click Save Settings to save your changes.
D-Link DCS-942L User Manual

IP Filter

42