D-Link DCS-942L User Manual page 14

Section 2 - Installation
Zero Configuration will navigate to the mydlink Live View tab for your camera
where you will see a screen similar to the following.
If you wish to connect your camera to your router wirelessly, you can simply
disconnect the Ethernet cable and move the camera to its intended location;
your router's wireless settings have been automatically transferred to the
camera, and no further configuration is required.
Your camera is now set up, and you can skip to "mydlink" on page 20 to learn
more about the mydlink features of this camera, or to "Configuration" on
page 21 for advanced configuration of your camera.
Note: If you see a white haze when viewing in night vision mode, the
night vision light on the camera may be reflecting off a nearby surface. Try
repositioning and aiming the camera.
D-Link DCS-942L User Manual 14