D-Link DCS-942L User Manual page 29

Section 3 - Configuration
Snapshot Notifications is a feature to send image snapshots via FTP or e-mail when a trigger is
activated. This step will only set up notifications to be sent with still images that are captured.
If you would like to have notifications with video, please leave this disabled and continue to
the next step.
Enable:
Check this box to enable the Snapshot function.
Only During: Check this box to setup a scheduled timeframe when notifications should be
sent. This is useful if you do not want to be notified when it would otherwise be
inconvenient, such as during the night or on weekends.
Snapshot Type: Select whether to take a single snapshot or to take 6 snapshots with a 1 second
interval between them.
Target:
Select where you want the snapshot to be sent. It may be uploaded to an FTP or
sent to an e-mail address. You will need to have all of the necessary information
filled out in order to use either of these features.
Click Next to continue.
D-Link DCS-942L User Manual 29