Table of Contents
Advertisement
Chapter 3–Installing an external DAT tape drive
DAT USB Tape Drives
20
2.
Plug the power cable securely into the socket on the rear panel of the
drive and plug the other end of the power cable into the power outlet.
1. USB cable (pre-fitted)
2. on/off switch
Figure 3-1 Connecting power and USB cables
3.
Plug the USB cable into the USB connector on the server.
Note:
It is important to ensure that you connect your drive to a USB 2.0
port. The drive will work on a USB 1.1 port but performance will be
severely degraded. See also
"Verifying USB installation for optimum
3. power cable
performance" on page 38.
1018932
Advertisement
Table of Contents
Need help?
Do you have a question about the DAT 160 and is the answer not in the manual?
Questions and answers