Loading And Unloading Cartridges; Inserting Cartridges; Figure 5-3 Inserting A Data Cartridge (Into A Dat 160 External Drive) - Tandberg Data DAT 160 User Manual

Usb

Hide thumbs Also See for DAT 160:

Table of Contents

Chapter 5–Operating your tape drive

Loading and unloading cartridges

DAT USB Tape Drives

Insert a cartridge into the slot on the front panel. As the cartridge is

inserted, the drive takes it and performs a load sequence.

Note:

The illustration shows a DAT 160 cartridge. These

cartridges are wider than earlier-format DDS

cartridges and can only be used with DAT 160 tape

drives. See

information about tape drive and cartridge

compatibility.

1. cartridge slot

2. arrow indicates leading direc-

tion

DAT 160 tape drives: The Ready light flashes green while the drive

performs its load sequence. When the cartridge is loaded, the Ready

light shows steady green.

DAT 72 tpe drives: The Tape light flashes green while the drive

performs its load sequence. When the cartridge is loaded, the Tape

light shows steady green.

"Data

cartridges" on page 31 for more

1018932

Table of Contents

Do you have a question about the DAT 160 and is the answer not in the manual?