Initial Start-Up (Engine) - MULTIQUIP QP-3TY Operation And Parts Manual

Stopping The Engine
Normal Shutdown
1. Move the engine speed lever to the low speed and run the
engine for about three minutes with no load.
2. After the engine cools, move the engine speed lever to the
STOP position (Figure 11).
ENGINE SPEED
LEVER
Figure 11. Engine Speed Lever (STOP Position)
3. Close the fuel cock (Figure 12).
Figure 12. Close Fuel Cock
4. Slowly pull the starter grip (Figure 9) until strong resistance
is felt and leave it in this position. This prevents rust from
forming while the engine is not in use.
CAUTI CAUTI
CAUTI CAUTION CAUTI
When stopping the engine, reduce the load slowly. Do
not stop engine suddenly since it may cause the
temperature to rise abnormally.
Emergency Shutdown
1. To stop engine immediately, quickly place the engine speed
lever to the STOP position.
QP- 3TY TRASH PUMP — OPERATION & PARTS MANUAL — REV. #0 (12/14/04) — PAGE 19
QP-3TY — INITIAL START-UP (ENGINE)
STOP