Re-Verber-Ray LD Series Installation Manual page 21

LD Series
Chart 3.5
Common Optional Accessories
Reflector Accessory
Elbow Reflector*
U-Reflector*
Side Shield Extension**
Protective Guard
* Reflectors cannot be rotated when used with a reflector elbow (RE), U-shaped reflector (RU), or
side shield (SSE).
** Refer to the Clearance to Combustible chart on page 9 for minimum distances to combustibles when
side shield extension(s) are used.
Additional accessory options are listed in the Detroit Radiant Products Company Tube Heater Accessory
Guide or online at www.detroitradiant.com .
Figure 3.17 • Reflector Shield Accessories
Description
90° bend, highly polished aluminum reflector elbow
designed to fit atop one elbow accessory fitting.
180° bend, highly polished aluminum reflector U-bend
designed to fit atop one U-bend accessory fitting.
Highly polished side shield extension used to direct
infrared rays downward, away from sidewalls and combustibles.
Used to prevent debris or objects from becoming lodged
between the radiant tube and reflector. Required when
mounting heaters below 8 ft.
Elbow reflector (P/N: RE)
Used over a 90-degree
elbow accessory fitting.
U-shaped reflector (P/N: RU)
Used over a U-bend
accessory fitting.
3.0 Installation
Side shield extension (P/N: SSE)
Directs infrared rays downward, away
from sidewalls and combustibles.
21
• Common Reflector Accessories
Part Number
RE
RU
SSE
PG