Re-Verber-Ray LD Series Installation Manual page 15

LD Series
Figure 3.6 • U-Tube Hanger Mounting Options
U-Tubes can be mounted from a single suspension
point using an optional Single Mounting Bracket
(P/N: SMB) with five S-hooks and #1 double-loop
chains.
Figure 3.7 • Angled Hanger Mounting Options
For 45 degree hanging angle use two
S-hooks and two #1 double-loop chains.
3.0 Installation
Single Mounting
Bracket
U-Tubes can be mounted at a 15, 30 or 45 degree
angle with two suspension points, using two optional
Brass Knuckle (P/N: BK) fittings, #1 double-loop
chains and S-hooks.
For variety of hanging angles, use an optional
Brass Knuckle (P/N: BK) fitting with a #1 double-
loop chain and S-hook.
15
• Hanger Placement and Suspension
Exhaust
End
45°
30°
15°
Brass Knuckle