Table of Contents
Advertisement
Hot-plug Components
8.4.3
Inserting a Hot-plug Memory Board
Ê Align the ends in the card guides and slide the memory board into the
memory board slot.
1
2 3
Bild 30: Inserting a memory board
Ê Push the green handle (4) down into the fully locked position until the latch
(5) engages.
Ê Push the white attention button (2) to integrate the new memory board into
the system.
The attention LED (1) is flashing. The integration procedure is running.
Ê Wait until the attention LED (1) stops flashing and the green power LED (3)
is lighting.
The new memory board is integrated into the system.
I
If the green power LED (3) is not lighting, the new memory board was
rejected by the system, e.g. because its size did not match the current
configuration.
Ê Close the cover again (see "Opening/Closing the Casing" on page 94).
A3C40069794
4
5
Memory boards
4
83
Advertisement
Table of Contents
