Pause Duration - Symbol Phaser P460 Reference Manual

Phaser Series Scanner Product Reference Guide

Pause Duration

This parameter allows a pause to be inserted at any point in the data transmission. Pauses are
set by scanning the bar code below followed by a two digit number (i.e. two bar codes), and
are measured in 1/10 second intervals. For example, scanning bar codes "0" and "1" inserts
a 1/10 second pause; "0" and "5" gives you a 1/2 second delay. Numeric bar codes begin
on page 5-90. If you make an error, or wish to change your selection, scan CANCEL on
page 5-92.
PAUSE DURATION
5-76