Maintenance And Specifications
Introduction
This chapter explains how to maintain your scanner and the specifications for it.
Maintenance
Do not allow any abrasive material to touch the scanner window.
t
Remove any dirt particles with a damp cloth.
t
Wipe the scanner window using a damp cloth, and if necessary, a non-ammonia
t
based detergent.
Do not spray water or other cleaning liquids directly into the scanner window.
t
If the contacts between the scanner and cradle become dirty, clean them with either
t
a pencil eraser or a cotton swab dampened with alcohol.
Change the battery when the batteries no longer provide 8 hours of scanning in
t
typical usage. This should occur after 2 years or more, depending on your daily use.
Changing the Battery
Once a battery is fully charged, it will generally last up to 10 hours without being returned
to the cradle. By returning it to the cradle during the day, you extend this time.
Chapter 4
4-1