Data Upload - Symbol Phaser P460 Reference Manual

The screen displays the scanned code (up to 25 characters), the current record number and
the maximum record number. The function initiates with the most recently scanned code, and
pressing the up and down arrow keys move through the stored data. Press <ENTER> or
<FN><BK> at any time exits the review mode and returns to the Batch application.

Data Upload

After scanning bar code records, press the <FN>1 key combination to upload these records
to the host application. The scanner indicates that upload is in progress with the following
screen:
You have 30 seconds from the time that this screen appears to either insert the scanner into
a cradle or attach a communications cable. If you fail to do so, or if the upload fails for any
reason, the following screen appears:
The upload may seem to pause before commencing. On a cable, this delay may be 3 to 4
seconds, while the scanner identifies which cable type has been connected. On a cradle, this
delay may be indefinite, due to the daisy chaining of scanners on a single communication
channel. If another scanner along the daisy chain is already communicating with the host
when this scanner is placed in the cradle, this scanner pauses to allow the other scanner to
complete its transaction before beginning. If the upload is successful, the user receives the
following screen:
Pressing the <BK> key causes the bar code data to be retained in memory. Any subsequent
bar codes are appended to the end of the file.
Pressing the <ENTER> key causes a confirmation screen to appear:
Uploading data.
Please wait ...
Figure 3-5. Data Upload Screen
Upload Failed! Retry?
<EN>=Y <BK>=N
Figure 3-6. Data Upload Failed Screen
Success! Erase Data?
<EN>=Y <BK>=N
Figure 3-7. Data Upload Success Screen
Operation
3-3