Vertical Mounting Bracket That Connects To The; Horizontal Mounting Bracket That Connects To - IBM System Storage DCS3700 Installation, User's, And Maintenance Manual

Orange circle
Figure 84. Vertical mounting bracket that connects to the midplane
d. Disconnect the right cable chain mounting bracket from the drive drawer. Insert your finger into
the orange circle (see Figure 85), and pull the mounting bracket completely out of the drive tray.
Remove the right cable chain.
Figure 85. Horizontal mounting bracket that connects to the drive drawer
e. Reinstall the right fan assembly. Wait until the fan speed slows down and the green Power LED
is lit before proceeding to ensure that the right fan assembly is operating correctly before
removing the left fan assembly. See "Replacing a fan assembly" on page 120 for the steps to
install a fan assembly.
f. Remove the left fan assembly. See "Replacing a fan assembly" on page 120 for the steps to remove
a fan assembly.
Attention: If you are performing this procedure with the power turned on, you must reinstall
the fan assembly within 10 minutes. Otherwise, the equipment could overheat.
g. Disconnect the left cable chain mounting bracket from the midplane. Insert your finger into the
orange circle, and pull the mounting bracket completely out of the storage expansion enclosure.
h. Disconnect the left cable chain mounting bracket from the drive drawer. Insert your finger into
the orange circle, and pull the mounting bracket completely out of the storage expansion
enclosure. Remove the left cable chain.
i. Reinstall the left fan assembly. See "Replacing a fan assembly" on page 120 for the steps to install
a fan assembly.
124
IBM System Storage DCS3700: Installation, User, and Maintenance Guide
Orange circle