Using The Teletext - Hisense HSLC8129HDI Instruction Manual

Using the TELETEXT

Activating teletext
Teletext is only available on a specific digital/analogue television station, example, Channel 7 (in digital
station).
Select the channel that is broadcasting the desired Teletext program.
Press [TEXT/MIX] button on the remote control to enter the Teletext mode and press the [CANCEL] /[D/A]button to exit
the Teletext mode.
Page selection
You can directly input your desired page number by pressing 0 ~ 9 buttons. You can sequentially read
pages by pressing [P-] or [P+] button.
HOLD
Some Teletext information is contained on more than one page, the pages automatically changing after a
given reading time.
Press the [HOLD] button to stop the page changing.
Press the [HOLD] button again to allow the page to change.
CANCEL
To exit Teletext mode.
Press the [CANCEL] button to switch to the TV mode.
SUB.CODE
Some Teletext pages contain sub page that require you to input the sub code.
Press the [SUB.CODE] button, sub-page will display. You can either press 0~9 buttons to input the
page or press [P-] and [P+] buttons for page up and down.
If you want to quit SUB.CODE mode, press [ SUB.CODE] button till " pages/sub pages " disappeared.
MIX
You can mix Teletext with TV pictures, which means transparent teletext.
Press [TEXT/MIX] button to mix, and press [TEXT/MIX] button again to cancel the mixed effect.
24
television