Controlling The Audio Settings - Hisense HSLC8129HDI Instruction Manual

Controlling the Audio
The Audio [Menu, Audio,...] submenu contains all controls necessary to adjust audio
to suit your needs and preferences.
AVC - 'Automatic Volume Control'
Lessens the gap in audio volume between the networks.
With the Digital Audio (PCM, 5.1 CH Audio) effect, you can enjoy higher quality audio.
(Supported via Optical digital audio Out, only available in digital TV mode.
If DTV accompanying sound output format is MPEG2, Digital Audio switch to 5.1 CH Audio,
there will no sound output in SPDIF output.)
A 5 band audio Equalizer allows fine control on the frequency response of this unit.
You can adjust individually each band and that configuration will be automatically saved
under User [SOUND, User] audio settings. Each band (100 Hz, 330Hz, 1 KHz, 3.3 KHz
and10 KHz) can be considered as a selective volume control which only adjusts a
fraction of audio frequency spectrum.
The sound Equalizer can also be easily configured for most frequent situations by
pressing the [SOUND] button in your remote controller.
Preset settings are provided for User, Music, Standard and Voice conditions.
Standard mode delivers a flat frequency response, which preserves the natural
characteristics of the original sound. In Music mode the extremes of low and high
frequencies are accentuated to enhance musical instruments reproduction. The opposite
effect is accomplished in Voice mode where very low and high frequencies are attenuated
to improve the reproduction and intelligibility of the human voice.
While you're listening to music or watching a movie, you can adjust your TV to your personal
preferences.
There is also a direct way to select sound output by pressing the [I/II] button on the remote
control. Press the [I/II] button to change sound output mode.
20
Audio
Balance
AVC Off
DigitalAudio PCM
Equalizer Settings
Headphone configure
: Move OK/ : Enter EXIT/MENU: Exit
Audio
Equalizersettings
100Hz 330Hz 1KHz 3.3KHz 10KHz
0 0 0 0 0
: Move : Change MENU : Back EXIT : Exit All
Audio
Headphone configure
Mute Off
AVC Off
Volume
Balance
:Move : Change MENU : Back EXIT : Exit All
Analog Audio
MONO
I/II: Change mode
0
50
0