Teletext Operations - Hisense LCD3204 User Manual

Using the TV features

Teletext Operations

SELECTING TELETEXT MODE
Select the channel that is broadcasting the desired Teletext program.
Press [ TEXT ] button and alternate between Teletext mode and normal mode.
Note: All the operations below should be under the Teletext mode except TIME operation.
PAGE SELECTION
You can directly input your desired page number by pressing [0~9] buttons.
You can sequentially read pages by pressing [
HOLD
Some Teletext information is contained on more than one page, the pages automatically changing
after a given reading time.
Press [ S-Video ] button to stop the page changing.
Press [ S-Video ] button again to allow the page to change.
REVEAL
Some Teletext pages contain quiz or questions with hidden answers.
Press [ ] button to see the answers.
Press [ ] button again to hide the answers.
CANCEL
When a page is selected in Teletext mode it may take some time before it becomes available.
Press [ YPbPr ] button to switch to the TV mode.
When required page is found, the page number will appear at the top of the TV picture,
press [ YPbPr ] button to return to the selected Teletext page.
Note: You can change TV program while in this mode.
SUB CODE
Some Teletext pages contain sub page that require you to input the sub code.
Press [ P. Mode ] button until ***|**** is displayed, and enter last four-digit sub code for the sub page you need.
MIX
You can mix Teletext with TV pictures, which means transparent teletext.
Press [Video] to mix, and press [ Video ] again to cancel the mixed effect.
ZOOM (Top/Bottom/Full)
Press the [ PC ] button to display the TOP HALF of the page.
Press again to display the BOTTOM HALF of the page.
Press again to return to a FULL PAGE display.
Note: Changing pages reverts to a FULL PAGE display.
or
] button.
-16-