Hisense HSLC8129HDI Instruction Manual page 22

Controlling the System
The System [Menu, System,...] submenu contains: Bluescreen, SetupWizard,
OSD Settings, Time and Factory reset. You can adjust them to your liking.
Bluescreen setting [Menu, System, Bluescreen]
If you prefer a Bluescreen, please set the Bluescreen option to 'On' in the System OSD.
Otherwise , please set the Bluescreen option to 'Off' in the System OSD. [Fig. 1]
SetupWizard setting [Menu, System, SetupWizard ]
By selecting 'Setup Wizard' and changing to 'ON', at next start up of your TV, you will be
given initial set-up options. You will be asked to select the Time Zone, Local time settings,
Auto Tune set-up for Digital and Analogue broadcasts. If the password option has been set,
you will be asked to input a password. [Fig. 1]
OSD Settings [Menu, System, OSD Settings ]
You can also adjust the OSD display time, time for which the menu will remain visible and
active for your adjustment.
available times are; 1 minute, 30 seconds and 10 seconds. Adjust to your preference .[Fig.2]
You can also adjust the OSD transparency options: Low ,Medium, and High .
Time Settings [Menu, System, Time ]
There are four items in the Time settings:
1, Time Zone: First, set the Time Zone based on your local area.
2, Date/Time: Please set current time and date.
3, Auto Turn-On: auto turn on the TV in your set time.
4, Auto Turn-Off auto turn off the TV in your set time. :
Factory reset [Menu, System, Factory reset ]
When you wish to reset the TV back to it's 'factory setting' you can do so by setting the
'Factory Reset' mode to YES. [Fig. 7]
This function is used to restore all parameter settings back to the factory or original levels. A
function which you might use if children have adjusted settings where you cannot return to
your normal preference.
[Fig. 3]
[Fig. 4]
[Fig. 5]
[Fig. 6]
21
[Fig. 1]
System
Bluescreen On
SetupWizard Off
OSD Settings
Time
Factory Reset
:Move : Change MENU : Back EXIT : Exit All
[Fig. 2]
System
OSD Setting
Transparency Low
Timeout 1Min
:Move : Change MENU : Back EXIT : Exit All
[Fig. 3]
System
Time:
Time Zone WA
Date/Time
Auto Turn-On
Auto Turn-Off
:Move : Change MENU : Back EXIT
[Fig. 4]
System
Date Time Settings:
Mode Manual
Input Date/Time:
2005 / 01 / 01
08 09 AM
:Move : Change MENU : Back EXIT
[Fig. 5]
System
Auto Turn-On
Mode Off
:Move : Change MENU : Back EXIT
[Fig. 6]
System
Auto Turn-Off
Mode Daily
Setting of Auto Turn-Off Time:
12 : 00 PM
:Move : Change MENU : Back EXIT
[Fig. 7]
System
Factory
Reset No
YES
If YES is selected , all parameters will be reset.
:Move OK : Select MENU: Back EXIT: Exit All
: Exit All
: Exit All
: Exit All
: Exit All