Thermostat Configuration; Setting The Thermostat Clock - Friedrich EMWRT-1 Instruction Manual

Thermostat Configuration

Once the thermostat is powered, thermostat configuration settings will appear on the thermostat
screen.
In order to properly operate the PTAC unit:
Set the thermostat clock;
➤
Enter the room number;
➤
Configure the equipment settings;
➤
Select Energy Savings Preset;
➤
The thermostat configuration screens have a 3-minute time-out. If no action is taken within three (3)
minutes, the thermostat will exit configuration settings.
CONFIGURATION
BUTTON
NOTE: You can access Thermostat Configu-
ration settings at any time by pressing the
"Configuration" button.
NOTE: If the thermostat is connected to a network, the equipment settings configured on the
thermostat will be ignored and the thermostat settings configured through the network will be
applied.

SETTING THE THERMOSTAT CLOCK

HOURS
Set the thermostat clock to current time in 24h (Military Time) format.
Use the "Up" and "Down" buttons to set the hours;
➤
Press the "Fan" button to advance to the minutes setting;
➤
Use the "Up" an "Down" buttons to set the minutes;
➤
Press the "F/C" button to advance to the next menu;
➤
Setting the clock correctly is crucial for proper operation of the thermostat.
6
MINUTES