Incidental Occupancy Threshold; Night Occupancy Threshold - Friedrich EMWRT-1 Instruction Manual

Custom Energy Savings Settings
05 – INCIDENTAL OCCUPANCY THRESHOLD
00-60 (05* factory setting) Select the minimum period of time (in minutes) for which occupancy
needs to be detected to enter the guest occupancy mode.
When occupancy is detected, thermostat will switch to occupied mode for a duration of
"Incidental Occupancy Threshold" selected here.
If occupancy is detected for a period of time shorter than the "Incidental Occupancy
Threshold" selected here, the thermostat will automatically revert to unoccupied mode at
the end of the "Incidental Occupancy Threshold" period and continue to observe energy
saving functions that were in effect before the room became occupied. This setting allows
ignoring incidental room visits.
If occupancy is detected for a period of time longer than the "Incidental Occupancy
Threshold" selected here, the thermostat will enter the guest occupancy mode. When the
thermostat is in the guest occupancy mode, it will revert to unoccupied mode and initiate
the setback temperature only when occupancy is not detected for the duration of the
setback delay (Heat or Cool) period.
06 – NIGHT OCCUPANCY THRESHOLD
00-60 (01* factory setting) Select the minimum period of time (in minutes) for which occupancy
needs to be detected in order to consider the room occupied during the "Night
Occupancy"period.
13