Thermostat Configuration - Friedrich EMWRT2 Instruction Manual

Thermostat Configuration

Once the thermostat is powered, thermostat configuration settings will appear on
the thermostat screen.
In order to properly operate the PTAC/Vert-I-Pak unit:
Set the thermostat clock;
Enter the room number;
Configure the equipment settings;
Select Energy Savings Preset;
The thermostat configuration screens have a 3-minute time-out. If no action is
taken within three (3) minutes, the thermostat will exit configuration settings.
NOTE: If the thermostat is connected to a network, the equipment settings
configured on the thermostat will be ignored and the thermostat settings
configured through the network will be applied.
CONFIGURATION
BUTTON
11