Introduction - Friedrich EMWRT-1 Instruction Manual

Introduction

Friedrich Air Conditioning EMWRT-1 Energy Management Thermostat for the hospitality industry
deliver unprecedented energy savings without compromising guest comfort.
Integrated occupancy sensor uses a combination of motion and thermal sensing technologies for
accurate occupancy detection. Reliable occupancy detection allows saving energy when rooms
are unoccupied.
Energy saving presets eliminate the guesswork and make it easy to adjust the energy saving
settings. (Patent Pending)
Fully configurable energy saving settings allow customizing the thermostat energy saving settings
to fit any situation.
Large buttons with international symbols make it easy to adjust the temperature in ±1° °F or °C
and control the fan speed.
Comprehensive configuration options ensure full compatibility with virtually any existing or
emerging hospitality HVAC system with up to 2 heat and 1 cool stages.
Built-in wireless mesh-networking enables optional remote management. For installation of a
networking thermostat with remote management, refer to the "Network Installation" manual.
Before You Begin:
Determine the appropriate installation location for the thermostat. The thermostat should face
➤
the bed area of the room.
Set the PTAC unit to "External Thermostat" (Class 2) mode. Consult the PTAC unit
➤
documentation to determine how to set the PTAC unit to "External Thermostat" mode.
Please note that the thermostat and the wireless control card are paired to operate together.
➤
The thermostat cannot be used with another wireless control card. Each PTAC unit requires
a separate thermostat and a wireless control card pair.
4