Thermostat Configuration - Friedrich EMWRT1 Instruction Manual

Thermostat Confi guration
Once the thermostat is powered, thermostat confi guration settings will appear on
the thermostat screen.
In order to properly operate the PTAC/Vert-I-Pak unit:
Set the thermostat clock;
Enter the room number;
Confi gure the equipment settings;
Select Energy Savings Preset;
The thermostat confi guration screens have a 3-minute time-out. If no action is
taken within three (3) minutes, the thermostat will exit confi guration settings.
NOTE: If the thermostat is connected to a network, the equipment settings
confi gured on the thermostat will be ignored and the thermostat settings
confi gured through the network will be applied.
CONFIGURATION
BUTTON
NOTE: You can access Thermostat Confi gu-
ration settings at any time by pressing the
"Confi guration" button.
11