Entering The Room Number; Configuring The Equipment Settings - Compressor Type - Friedrich EMWRT-1 Instruction Manual

Thermostat Configuration

ENTERING THE ROOM NUMBER

Enter the room number by changing the digits on the screen. Leading zeros "0" preceding
other digits will be ignored, i.e. Room number "123" should be entered as "00123".
Use the "Up" and "Down" buttons to change the digit;
➤
Press the "Fan" button advance to the next digit;
➤
Press the "F/C" button to advance to the next menu;
➤
Entering the room number correctly is crucial for proper operation of networked thermostats.

CONFIGURING THE EQUIPMENT SETTINGS - COMPRESSOR TYPE

COMPRESSOR TYPE
Use the "Up" and "Down" buttons to change the compressor type by changing the first digit;
➤
0 No Compressor
1 * Heat Pump
2 Air Conditioner
Press the "Fan" button to advance to the next setting;
➤
* Indicates factory setting;
7