Storage Procedure - Suzuki DL650A Owner's Manual

STORAGE PROCEDURE

AND MOTORCYCLE
CLEANING
STORAGE PROCEDURE
If your motorcycle is to be left
unused for an extended period of
time, it needs special servicing
requiring appropriate materials,
equipment and skill. For this rea-
son, Suzuki recommends that you
trust this maintenance work to
your Suzuki dealer. If you wish to
service the machine for storage
yourself, follow the general guide-
lines below:
MOTORCYCLE
Clean the entire
Place the motorcycle on the side
stand on a firm, flat surface where
it will not fall over. Turn the han-
dlebars all the way to the left and
lock the steering, and remove the
ignition key.
FUEL
1. Fill the fuel tank to the top with
fuel mixed with the amount of
gasoline stabilizer
mended by the stabilizer man-
ufacturer.
2. Run the engine for a few min-
utes until the stabilized gaso-
line fills the fuel injection
system.
ENGINE
1. Pour one tablespoon of motor
2. Drain the engine oil thoroughly
3. Cover the air cleaner intake
BATTERY
1. Remove the battery from the
2. Clean the outside of the bat-
motorcycle.
3. Store the battery in a room
TIRES
Inflate tires to the normal pres-
sure.
EXTERNAL
•
recom-
•
•
9-2
oil into each spark plug hole.
Reinstall the spark plugs and
crank the engine a few times.
and refill the crankcase with
fresh engine oil all the way up
to the filler hole.
and the muffler outlet with oily
rags to prevent humidity from
entering.
motorcycle.
tery with mild
remove corrosion from the ter-
minals and wiring harness.
above freezing.
Spray all vinyl and rubber
parts with rubber protectant.
Spray unpainted surfaces with
rust preventative.
Coat painted surfaces with car
wax.
soap and