Suzuki DL650A Owner's Manual page 107

IGNITION SYSTEM CHECK
1. Remove the spark plugs and
reattach them to the spark
plug leads.
2. Put the engine stop switch in
the "" position and the igni-
tion switch in the "ON" posi-
tion. While holding a spark
plug with
against the engine, push the
electric starter button. If the
ignition system is operating
properly, a blue spark should
jump across the spark plug
gap.
3. If there is no spark, clean the
spark plug. Replace it if neces-
sary. Retry the above proce-
dure with the cleaned spark
plug or new one.
4. If there is still no spark, take
your motorcycle to an autho-
rized Suzuki dealer.
WARNING
Performing the spark test
improperly can cause a high
voltage electrical shock or an
explosion.
Avoid performing this check if
you are not familiar with this
procedure, or if you have a
heart condition or wear a pace-
maker. Keep the spark plug
away from the spark plug hole
during this test.
its base firmly
COMPLAINT: Engine Stalls
1. Make sure there is enough fuel
in the fuel tank.
2. If the coolant temperature
meter indicates "FI", showing
signs of trouble in the fuel
injection system, take your
machine
Suzuki dealer. Refer to the
"INSTRUMENT PANEL" sec-
tion for an explanation of the
fuel injection system indicator.
3. Check the ignition system for
intermittent spark.
4. Check the idle speed. The cor-
rect idle speed is 1200 – 1400
r/min.
8-3
to an authorized