4. Reinstall the drain plug and
gasket.
Tighten
securely with a wrench.
Oil filter wrench
(Part No. 09915-40620)
5. Turn the oil filter 3 counter-
clockwise with a Suzuki "cap
type" oil filter wrench or a
"strap type" filter wrench of the
proper size.
the
plug
6. Wipe off the mounting surface
7. Smear
8. Screw on the new filter by
7-18
4 on the engine where the
new filter will be seated with a
clean rag.
a
little
around the rubber gasket 5 of
the new oil filter.
hand until the filter gasket con-
tacts the mounting surface
(small resistance will be felt).
engine
oil