Control Panel Functions; Explanation Menu Codes - SHOWTEC MiniMax 250 User Manual

Control Panel Functions

Explanation Menu Codes

ADDR: This allows you to change the start address from 1-512
MODE: This allows you to change the control mode: M-DM = DMX Mode
rPAN: This allows you to change the PAN direction: REV = Reverse
rTILT: This allows you to change the TILT direction: REV = Reverse
r-PT: This allows you to change the PAN and TILT direction simultaneously: REV = Reverse
nchn: This allows you to control the ELC lamp via DMX: 7 CH = Lamp controlled via DMX
TEST: This allows the user to test device's features without a DMX-signal: PAN = Test the PAN movement
DSPL: This allows you to change the display orientation and flip it 180º:
REST: This allows you to reset the fixture
To set the control address
1. Scroll to Addr in the main menu and press ENTER. The current address is displayed.
2. Scroll to the address that is assigned to the fixture on the controller. Press ENTER to activate the address
setting.
Channel Mode
6 or 7 Channels
M-SO = Sound-Active Master
M-AU = Stand-alone
M-SL = Sound-Active Slave
STND = Standard
STND = Standard
6 CH = Lamp controlled via fixture
12
STND = Standard
TILT = Test the TILT movement
COL = Test the color-wheel
GOBO = Test the gobo-wheel
SHUT = Test the shutter
REV = Reverse
STND = Standard
Fig. 6