Loading - Westinghouse WSF67251 User Manual

LOADING YOUR DISHWASHER
If your dishes are correctly placed in the dishwasher,
you will be using it in the best way in terms of energy
consumption, washing and drying performance.
There are two separate baskets for you to load your
dishes into your machine. You can load into the lower
basket such round and deep items as pots with long
handles, pot lids, plates, salad plates, cutlery sets.
The upper basket has been designed for tea plates,
dessert plates, salad bowls, cups and glasses. When
placing long-stem glasses and goblets, lean them against
the basket edge, rack or glass supporter wire and not
against other items. Do not lean long glasses against
one another or they wont remain steady and can be
damaged.
It is recommended that thin narrow items be placed into
the middle sections of baskets. You can place spoons
among the other cutlery sets in order to prevent them
from sticking to one another, use the cutlery grid in order
to obtain the best result.
To avoid any possible injuries, always place long-handle
and sharp-pointed dishes such as serving fork or bread
knife with their sharp points facing down or horizontally
on the baskets.
CAUTION WARNING
Place your dishes into your machine in a way that they
will not prevent the upper and lower spray arms from
spinning.
Top basket cup rack
Height Adjustable Rack
These racks are designed to increase the capacity of the
top basket. You can place your glasses and cups on the
racks. You can adjust the height of these racks. Thanks to
this feature, you can place different sizes of glasses under
these racks.
Thanks to height adjustment plastics mounted on the
basket, you can use your racks in two different heights.
In addition, you can place long forks, knives and spoons
on these racks laterally, so that they do not block the
revolution of propeller.
16
LOADING YOUR DISHWASHER
Top basket height adjustment while full
Basket height adjustment mechanism on the top basket
of your machine is designed to let you adjust the height
of your top basket (refer to diagram 1 ) upwards or
(refer to diagram 2 ) downwards, without removing it
from your machine when it is full, and create large spaces
at the top or bottom area of your machine as needed.
Basket of your machine is set to upper position in factory
settings.
In order to raise your basket, hold it from both sides and
pull it upwards. In order to lower it, hold it from both sides
again, pull upwards and lower carefully.
Make sure that both sides are in the same position
(up or down).
1 2
LOADING YOUR DISHWASHER
Spoon rack/Glass support
It allows your long-stemmed glasses to be washed safely
as well as providing a convenient alternative location to
wash spoons and forks. Do not lean your long-stemmed
goblets and glasses against each other but towards
the spoon rack, so that during the washing cycle this
prevents glasses and goblets from being damaged.
There are 4 different positions for your spoon rack.
Depending on the type of long stemmed glasses, you
can set your spoon rack to the positions number 1 and 2.
Use it for your spoons and forks while it was in position 1.
If you do not want to use the spoon rack positions 3 or 4
are available.
1
If you do not want to use spoon rack, you can bring it to
the positions 3 or 4, so that you can form larger-volume
areas in the upper basket b.
3 4
a
2
b
17
LOADING YOUR DISHWASHER