Transmitter Functions - Excalibur RS-260-EDPB Operation Manual

LOcK / ARm: While the system is unlocked / disarmed, Press
and hold the "START" button for 1 second.
unLOcK / DiSARm: While the system is locked / armed, Press
and hold the "START" button for 1 second.
REmOTE START: Press and release the "START" button twice
within 5 seconds. (see user feature #8 for additional options)
x2
• If the engine stalls, the system will make up to 3 more attempts.
• Each time you park, set the climate controls as desired when you use the remote start. The
engine will run for the preset run time (see user feature #1).
• Run Time Extender: Press the "START" button one time during remote start to restart the
engine run timer.
nOTE: This can only be used once per remote start cycle.
• If you decide not to drive your vehicle, you can turn off the remote start using the same method
to turn it on (Default = press "START" twice in 5 seconds)
nOTE: if remote start activation is programmed for 1 press, the 1st press activates Run
Time Extender so an additional press is required to turn off remote start.
• Upon entering the vehicle during remote start mode, turn the ignition key to the "ON/RUN" posi-
tion (nOT START!!). When you press the brake pedal, the remote start will turn off allowing the
ignition key to take over.
• THE SIREN / HORN WILL CHIRP & THE PARKING
LIGHTS WILL FLASH ONCE.
• THE SIREN / HORN WILL CHIRP TWICE & THE PARK-
ING LIGHTS WILL FLASH TWICE, THEN ILLUMINATE FOR
30 SECONDS.
• THE PARKING LIGHTS WILL FLASH ONCE AND THE
STATUS LIGHT WILL FLASH RAPIDLY.
• THE SYSTEM WILL TURN ON THE IGNITIONS AND
PROCEED TO START THE ENGINE.
• ONCE THE ENGINE IS RUNNING, THE PARKING
LIGHTS WILL TURN ON AND STAY ON AND THE STATUS
LIGHTS WILL FLASH SLOWLY.

Transmitter Functions

3